K60 Drilling Rig

The K60 Drilling Rig is a compact drilling unit ideally suited for water well, Solar, geothermal and geotechnical drilling applications.

Introduction

The modular design allows for many customisable options from drill head to clamps to added accessories like mud pumps and remote controls. With setups for mud or air drilling (optional 5×7 Mud Pump replaces Rod Rack) the K60 is compatible with all drilling methods currently available.

A top mounted winch assembly, in-line lubricator, water pump for dust suppression and air swivel are included as standard.

Drilling applications

  • Geothermal
  • Geotechnical
  • Water Well
  • Solar Panel Installation

K60 drilling rig
K60 drilling rig

Limited Access

There are many features on the K60 that make it a restricted access rig which include horizontal mast position, width adjustable undercarriage (863-1524mm) and retractable hydraulic stabilisers, these features allow this rig to get just about anywhere.

With engine and hydraulic systems all onboard the rig there is no external power unit required. This makes the rig ideal on uneven ground including  drilling for solar farm installations.

Movement & Stability

The K60 is equipped with the dual ram tilt system which enables the mast to angle 30˚ side to side allowing the rig to perform angled drill holes and compensate for gradients in ground surface.

Also included are x4, 3 position hydraulic stabiliser legs for added stability and safety and the head slide option which allows the operator to side shift the drill head by 600mm clearing a path for the winch cable.

K60 drilling rig
k60 drilling rig

Practicality

The Swing out ‘Z’ frame control arm is a standard feature of the K60 which allows the operator to have full view of the drill mast and drill position at a safe distance.

Controls

From the K60’s single control panel you can control every aspect of the rig in the best position for the operator.

Two features on this panel allow the operator to set the down feed and hold back rates when drilling with rods, which becomes very useful when drilling past 100 meters.

K60 drilling rig Controls
On-board Tooling Storage

On-board Tooling Storage

The K60 is equipped with a large on-board rod rack as standard on one side of the rig and is capable of holding 100 meters of 3 meter drill rod storage. An alternative option is to replace the rod rack with a 5×7 mud pump.

K60 Specifications

ROTARY HEADS : (JT-200 SERIES)

Max Torque 10,400 ft-lbs with JT205 (14,000 Nm)
Max Speed 205 rpm with JT222-M
Through Bore 2-3/8” (60 mm)
Speeds 2-Speed Variable

POWER & HYDRAULICS

System Pressure 3,000 psi (206 bar)
Max Flow 47 gpm (180 lpm)
Max Pullback 22,000 lbs (10,000 kg)
Max Pushdown 16,000 lbs (7,257 kg)
Engine Power 90 hp (70 kW)
Fuel Tank 31 gallons (117 L)
Hydraulic Tank 65 gallons (248 L)
Cooling System Liquid Cooled

MAST MOVEMENT

Side to Side +/- 36° (90°Optional)
Fore and Aft +3° to -90°
Slide 16” (406 mm)

DIMENSIONS & WEIGHT

Height (Drilling Position) 18’ 3” (5.56 m)
Height (Transport Position) 7’ 2” (2.17 m)
Length (Drilling Position) 12’ 3” (3.73 m)
Mast Stroke 11’ 10” (3.6 m)
Width 60” (1.52 m) (48″ no rod rack)
Weight 10,955 lbs (4,970 kg)
Track Width 60” (1.52 m) (48″ no rod rack)
Track Length 90” (2,286 mm)

* Dependant on options / Additional upgrades may be required.

K60 : STANDARD FEATURES

Clam Clamps & Breakout Wrench. 9” OD (229 mm) bore.
Rotation Head Horizontal Slide. 24” (609 mm) slide.
Onboard Rod Rack. Holds 350’ of 10’ drill rods.
Winch & Mast Extension. 2,200 lbs (998 kg) pull.
Lubricator. 2.2 gallons (8.3 L).
Swing-Out ‘Z’ Frame Control Arm.
Hydraulic Jack Legs.
Auxiliary Spool Control.

AVAILABLE OPTIONS

Double Breakout Clamps.
Safety Clamp System. Hands-free breakout.
Auxiliary Winch. 42’ rope / 2,000 lbs pull.
Winch Upgrade. 4,500 lbs (2,040 kg) pull.
Remote Controls. Tracks Only or Tracks, Rotation & Feed.
Dust Suppression System for DTH Hammer Drilling.
Trip Wire Safety System. (European Spec).
Mast Mounted Flood Lights.
Mud Pump. 150-180 gpm / 300-800 psi.*
JT-300 Series Drill Heads: Max Torque 20,800 ft-lbs.*

Drilling Rig Options

You can view the options for our new drilling rigs that extend their capability to overcome the most demanding projects or environments.

Take a look at our new drilling and piling rig options!

Service & Support

At PHS Solutions we have the drilling experience and knowledge to help you specify the right equipment & tooling for all your drill projects.

UK based technical assistance and support.

Bespoke tooling packages including rods, hammers, augers, casings systems and drill adapters.

Parts stockist for many types of drilling rig products

Drilling equipment spares for K40, K60, TD308, TD610, T1000 and many more.

Need help choosing a new rig?

Get in touch to discuss your specific piling and drilling needs.

Contact us